Parrot ISO Cable

Parrot ISO Cable

Length:130mm

Part Number# PI020446AB

This cable connected to the 16 Pin Connector
 * 1) Park Break (Green, Terminated with Male Barrel Connector)
 * 2) *Can be interconnected to the Extra Ground on Pin 2 to bypass Parking Break detection
 * 3) Extra Ground (Black, Terminated with Female Barrel Connector)
 * 4) Illumination (Pink, Interconnected with Male Bullet Connector for Pin A6)
 * 5) *Night Mode setting while +12V is present
 * 6) Rear Left [-] (Green/Back, Goes to Pin B8 of ISO 10487 Socket)
 * 7) Rear Left [+] (Green, Goes to Pin B7 of ISO 10487 Socket)
 * 8) Front Left [-] (White/Black, Goes to Pin B6 of ISO 10487 Socket)
 * 9) Front Left [+] (White, Goes to Pin B5 of ISO 10487 Socket)
 * 10) Car Ground (Black, Goes to Pin A8 of ISO 10487 Socket)
 * 11) Reverse Gear (Orange, Terminated with Male Barrel Connector)
 * 12) *Switches to Camera Input while +12V is present
 * 13) Power ANT/AMP (Blue, Interconnected with Male Connector for Pin A5)
 * 14) *Provides +12V current when headunit is powered on
 * 15) ACC (Red, Interconnected with Male Bullet Connecto for Pin A7)
 * 16) *Headunit goes to sleep and flashes "Good Bye" message if +12V is not present and shuts down completely after 15 minutes if power does not return.
 * 17) Rear Right [-] (Purple/Black, Goes to Pin B2 of ISO 10487 Socket)
 * 18) Rear Right [+] (Purple, Goes to Pin B1 of ISO 10487 Socket)
 * 19) Front Right [-] (Grey/Black, Goes to Pin B4 of ISO 10487 Socket)
 * 20) Front Right [+] (Grey, Goes to Pin B3 of ISO 10487 Socket)
 * 21) Car Battery (Yellow, Interconnected with 15A Fuse and Male Bullet Connector for A4)
 * 22) *Main Power Draw,

The wires lead to an ISO 10487 Socket


 * A)


 * 1) Not Connected
 * 2) Not Connected
 * 3) Not Connected
 * 4) +12V Car Battery (Yellow, Interconnected with Female Bullet Connector for Pin 16)
 * 5) Power ANT/AMP (Blue, Interconnected with Female Bullet Connector for Pin 10)
 * 6) Illumination (Pink, Interconnected with Female Bullet Connector for Pin 3)
 * 7) +12V Switched (Red, Interconnected with Female Bullet Connector for Pin 11)
 * 8) Ground (Black, Interconnected with Female Bullet Connector for Pin 8)
 * ​B)


 * 1) ​Rear Right [+] (Purple, Goes to Pin 13 of 16 Pin Connector)
 * 2) Rear Right [-] (Purple/Black, Goes to Pin 12 of 16 Pin Connector)
 * 3) Front Right [+] (Grey, Goes to Pin 15 of 16 Pin Connector)
 * 4) Front Right [-] (Grey/Black, Goes to Pin 14 of 16 Pin Connector)
 * 5) Front Left [+] (White, Goes to Pin 7 of 16 Pin Connector)
 * 6) Front Left [-] (White/Black, Goes to Pin 6 of 16 Pin Connector)
 * 7) Rear Left [+] (Green, Goes to Pin 5 of 16 Pin Connector)
 * 8) Rear Left [-] (Green/Black, Goes to Pin 4 of 16 Pin Connector)